| 序号 | 产品编号 | 名称 | Weight | Description | Fixture time* [min] | Bonding gap to [mm] | Packing [ml] | Temperature range [°C] | Strength | Alternatively Loxeal** | 售价 | 订购数量 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
全部
|
全部
|
全部
|
全部
|
全部
|
全部
|
全部
|
全部
|
全部
|
全部
|
|||
| 1.0 | 638/10 | 21g / pc. | Special joint products with very high gap filling and excellent temperature stability (to +180°C). For adhesion of components that are used in gears. pulley blocks or similar applications. DVGW. NSF and WRAS approval. | 8 | 0.25 | 10 | up to max. +180 | high | 85.21/10 | ￥125.76 | ||
| 2.0 | 648/10 | 21g / pc. | Joint products with good gap filling. quick touch-safe and excellent temperature stability (up to 180°C). For fixing bearings. shafts etc. DVGW. NSF and WRAS approval. | 5 | 0.15 | 10 | up to max. +180 | high | 83.21/10 | ￥130.16 | ||
| 3.0 | 603/10 | 20g / pc. | Improved Loctite 601. For fixing cylindrical components with limited gaps. Is particularly suited for bearing attachment. Tolerates oily contaminants to a small extent. Tested and recommended for leading manufacturers of roller bearings. | 8 | 0.10 | 10 | up to max. +150 | high | - | ￥125.76 | ||
| 4.0 | 620/50 | 85g / pc. | Special joint products with high gap filling and extended temperature stability (to +230°C). For mounting dowels in coolers. slide bushes in pump housings and bearings in vehicle gearboxes. | 80 | 0.20 | 50 | up to max. +230 | high | - | ￥521.28 | ||
| 5.0 | 641/250 | 320g / pc. | Recommended for cylindrical parts that are continuously maintained and. if necessary.. removed. such as e.g. mounting of bearings on shafts or in bearing housings. | 30 | 0.10 | 250 | -55 to max. +150 | medium | 53.11/250 | ￥2099.04 | ||
| 6.0 | 641/50 | 80g / pc. | Recommended for cylindrical parts that are continuously maintained and. if necessary.. removed. such as e.g. mounting of bearings on shafts or in bearing housings. | 30 | 0.10 | 50 | -55 to max. +150 | medium | 53.11/50 | ￥490.80 | ||
| 7.0 | 648/50 | 80g / pc. | Joint products with good gap filling. quick touch-safe and excellent temperature stability (up to 180°C). For fixing bearings. shafts etc. DVGW. NSF and WRAS approval. | 5 | 0.15 | 50 | up to max. +180 | high | 83.21/50 | ￥488.00 |
Catalogue page Pneumatic Atlas 8 (Page 919)
