Exhaust air one-way flow controls with slotted screw, Type B
Type B - exhaust air can be controlled Principle of operation: Exhaust air controllable - free of supply air (from thread to banjo throttled)
Recommended use: For cylinder from Ø 16 mm
Advantages: •good operating options without jumping, •even running, •forward and return strokes at different speeds possible
Type A - supply air can be controlled Principle of operation: Exhaust air controllable - free of supply air (from banjo to thread throttled)
Recommended use: For smaller Ø and short strokes (small volumes)
Advantages: •even small air volumes can be controlled, •forward and return strokes at different speeds possible
Type C - supply and exhaust air can be controlled Principle of operation: Supply and exhaust air can be controlled
Recommended use: For small and single-acting cylinder
Advantages: •Inlet and return flow same speeds
Disadvantages: •Only used rarely without "jumping"
Materials: Banjo bolt: nickel-plated brass, seal: NBR
Temperature range: -20°C to max. +80°C
Pressure range: 0.2 - 10 bar
Catalogue page Pneumatic Atlas 8 (Page 707)
Suitable accessories:
Reducing nipple with cylindrical male and female thread, PN 16/40
Sleeves, reducing sockets - hexagonal, PN 16/40
5/2-way solenoid valves G 1/4" with hole pattern according to NAMUR, SN3000 model series
Cylinder ISO 15552 with magnet and adjustable end position damping - Eco-Line, Type XLE/TM
Cylinder ISO 15552 with magnet and adjustble end position damping - Eco-Line, Type TME (will be discontinued)
Ring open-end wrench (angled)
PTFE sealing tape, standard quality
Gaskets made of hard PVC (standard)
Loxeal thread seals
Sealing strips for metal and plastic, Loctite
All technical data are to be understood as non-binding reference values.
prices given plus VAT
Click here in order to show prices with VAT included.
