Air conserving valves - pressure regulators with check valves

Temperature range: -10°C to max. +70°C
Operating pressure: 1 - 16 bar
Setting pressure: 1 - 8 bar
You give away air, and therefore money, if you do not reduce the return air by up to 85%:
•the working pressure is only needed in one direction, •the reset pressure set of 1 bar, for example, remains constant even with sinking input pressure , •when the primary pressure is applied on the thread side, the set pressure comes out of the connection side. If there is primary pressure from the connection side, this pressure comes out at the thread side without change due to the check valve. The pressure regulator can also be set to allow the return stroke to be uncontrolled (installation behind the valve) to, for example, control the forward stroke of a device.
Catalogue page Pneumatic Atlas 8 (Page 703) Technical documentation Suitable accessories:

Polyurethane hoses, external tolerance

Polyurethane hoses, internal tolerance

Polyamide hoses, standard

TKB tube - the "Metal Plastic" -pipelines

PTFE / PFA hoses

Polyethylene hoses

Polyamide coil tubes (PA 12 W), DIN 73378 / DIN 74324*

Cylinder ISO 15552 with magnet and adjustable end position damping - Eco-Line, Type XLE/TM

Cylinder ISO 15552 with magnet and adjustble end position damping, Type XL

tube cutter

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.