Locking units, for cylinders ISO 15552

cylinders - shock absorbers - vacuum > Pneumatic cylinders > Cylinder ISO 15552 (replaces ISO 6431 VDMA) (Ø 32 - 500) > Locking units, for cylinders ISO 15552

已选总价:￥0.00
已选数量:0件

所有费用均已包含增值税，不含运费。运费详情请参阅运费指导书。

产品详情与编号

序号	产品编号	名称	Weight	L10 [mm]	L9 [mm]	L8 [mm]	L7 [mm]	L6 [mm]	L5 [mm]	L3 [mm]	L2 [mm]	L1 [mm]	G2	G1	F [mm]	D4 [mm]	D2 [mm]	D1 [mm]	C [mm]	B [mm]	A4 [mm]	A3 [mm]	A2 [mm]	A1 [mm]	Theoretical maximum cylinder force at 6 bar [N]	Piston rod Ø (f8 / h9) [mm]	Requires cylinder piston rod extension [mm]	Retention force (static) [N]	Cylinder Ø [mm]	Version	售价
	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部	全部
1.0	XL 80/100 BREMS P		900g / pc.	16	38.5	27.0	65.0	115	92	18	58	16	M 8	M 10	65.0	11.0	48	55	130	120	60	10.0	70	89.0	3.016	25	82	5.000	80 and 100	Single clamping cartridge	￥3056.08
2.0	XL 125 BREMS P		1.6kg / pc.	20	51.0	37.0	85.0	154	122	27	70	25	M 10	M 12	75.0	13.0	65	60	150	140	75	11.0	95	110.0	7.363	32	110	7.500	125	Single clamping cartridge	￥4571.12
3.0	XL 80 BREMS		2.3kg / pc.	16	35.5	28.0	62.0	110	90	16	58	16	M 8	M 10	52.5	11.0	48	45	105	100	44	10.0	70	72.0	3.016	25	80	5.000	80	Complete locking unit	￥4235.28
4.0	XL 63 BREMS P		360g / pc.	12	29.5	21.0	49.0	82	70	15	40	15	M 8	M 8	42.5	8.5	38	45	85	82	32	7.5	55	56.5	1.870	20	60	2.200	63	Single clamping cartridge	￥1997.68
5.0	XL 32 BREMS P		95g / pc.	8	20.5	16.0	32.0	58	48	12	28	8	M 5	M 6	25.0	6.6	20	30	50	48	16	4.2	40	32.5	483	12	43	600	32	Single clamping cartridge	￥1155.36
6.0	XL 40 BREMS		360g / pc.	10	22.5	19.5	35.5	65	55	12	33	10	M 5	M 6	29.0	6.6	24	35	58	56	21	4.5	46	38.0	754	16	46	1.000	40	Complete locking unit	￥1757.28
7.0	XL 32 BREMS		270g / pc.	8	20.5	16.0	32.0	58	48	12	28	8	M 5	M 6	25.0	6.6	20	30	50	48	16	4.2	40	32.5	483	12	43	600	32	Complete locking unit	￥1587.84
8.0	XL 100 BREMS		3.3kg / pc.	16	38.5	27.0	65.0	115	92	18	58	16	M 8	M 10	65.0	11.0	48	55	130	120	60	10.0	70	89.0	4.712	25	82	5.000	100	Complete locking unit	￥4719.76
9.0	XL 63 BREMS		1.1kg / pc.	12	29.5	21.0	49.0	82	70	15	40	15	M 8	M 8	42.5	8.5	38	45	85	82	32	7.5	55	56.5	1.870	20	60	2.200	63	Complete locking unit	￥2839.84
10.0	XL 125 BREMS		6kg / pc.	20	51.0	37.0	85.0	154	122	27	70	25	M 10	M 12	75.0	13.0	65	60	150	140	75	11.0	95	110.0	7.363	32	110	7.500	125	Complete locking unit	￥6856.64
11.0	XL 50 BREMS P		210g / pc.	12	29.5	21.0	49.0	82	70	16	39	15	M 6	M 8	35.0	8.5	30	40	70	68	24	11.5	54	46.5	1.178	20	60	1.500	50	Single clamping cartridge	￥1540.00
12.0	XL 40 BREMS P		105g / pc.	10	22.5	19.5	35.5	65	55	12	33	10	M 5	M 6	29.0	6.6	24	35	58	56	21	4.5	46	38.0	754	16	46	1.000	40	Single clamping cartridge	￥1252.00
13.0	XL 50 BREMS		700g / pc.	12	29.5	21.0	49.0	82	70	16	39	15	M 6	M 8	35.0	8.5	30	40	70	68	24	11.5	54	46.5	1.178	20	60	1.500	50	Complete locking unit	￥2166.24

注：本公司对上述参数保有最终解释权，如若变动，恕不通知。

Locking units, for cylinders ISO 15552

Scope of delivery: Locking unit is delivered including fastening screws
Materials: Body: anodized aluminium, clamp jaws: brass, piston: POM, spring: spring steel, seals: NBR / PUR
Temperature range: -20°C to max. +80°C
Operating pressure: 4 - 10 bar
Function: The locking unit is used to firmly hold the round stock (chromium-plated steel, stainless steel) such as piston rods, guides etc. in the desired position. Special adaptors for cylinders are available. During venting (energy failure), the clamping unit automatically clamps the round stock and releases it (powerless break!) during pressure application.
Advantages: •short response time and high switching frequency possible, •long service life, •exactly reproducible positioning thanks to exact guidance of the jaws in the housing, •due to the use of special brass extremely low wear on jaws and the rod, •automatic, safe break in the event of energy failure (powerless break!)
Warning: The locking unit should not be used as a safety device!
Warning: When using pneumatic cylinders, the locking unit should be opened only if equilibrium of forces prevails at the piston, otherwise the backward movement of the piston rod could lead to an accident. Shutting off the supply of compressed air on both the sides (e.g. using a 5/3-way valve, centre position shut off) guarantees no safety! In many cases a 5/3-way valve can cause breathing in the centre position. Please ask us in individual cases.

Catalogue page Pneumatic Atlas 8 (Page 769)

Technical documentation Suitable accessories:

L push-in fittings, short, standard

Push-in fittings with male and female threads, standard

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.